TLU79 INCOMING PROBLEM

[hhkarasulu]

Hi Masters

I try to work an fct devices with TLU79.
Outgoing call is ok but incoming call doesn't work.
How can I configure paremeters for incoming call?

Thank you for yout kindy helps.

 

[rfpup]

Simple way:

Inside the confguration of FCT there must be something like incoming call:
You must write there the number of the extension you want to be answered

 

[hhkarasulu]

It is already done for answer position for incoming calls in FCT paremeters.

I want to learn MXONE TSW paremeter ROCAI RODAI and other paremeterr What I should do.

Thank you.

 

[rfpup]

[tt]ROCAP:ROU=120;ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
120 7110000000000010 4 3000000001 0 30 128 00151515 211110000030 111111

END

<RODAP:ROU=120;ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
120 SL60 H'00000214 H'15500000 H'46310000 NO

END

<RODDPEST=068;EXTERNAL DESTINATION ROUTE DATA
DEST DRN ROU CHO CUST ADC TRC SRT NUMACK PRE
068 120 00050001000002500000000000 0 1 0[/tt]

 

[hhkarasulu]

Thank you rfpup for help.But when I make a incoming call only 1 ring I receive and link drops.Actualy I try to work a bri device for outgoing and incoming call.BRI FCT is configured as NT.

 

[rfpup]

BRI gateway need to be configured as TE

There is another discussion about this issue in this forum so you may search here to find more information

 

[hhkarasulu]

Thank you rfpup.

Now it works.problem is solved.
Fct devices configured as NT.
Fixed dialing number remowed.
latest MXONE parameters is below

APPLICATION SYSTEM PARAMETERS
PARNUM PARVAL
85 1
END


<ROCAP:ROU=190;
ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
190 7120000100000010 7 3000000001 0 30 128 00151515 211110000030 111111

END

<RODAP:ROU=190;
ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
190 SL60 H'00000A14 H'15500000 H'46414000 NO


<RODNP:ROU=190,TRU=ALL;
ROUTE DAY AND NIGHT NUMBER DATA
ROU TRU DAY NIG
190 7000 7300

END

<OPCTP:CORG=1;
OPERATOR CALL TYPE DATA
CORG CALT ROU OACC CUST NDIR RERNUM CEN CCOP TIME OFLNUM SDAY SNIG
1 6 190 7000 - Y 7300 N N - - - -
END

 

[rfpup]

if configured as NT you may see synchronization problems in the future if the PBX is connected to PSTN and having sycnchronization from PSTN