TLU79 configuration for AXE in BC12

[Runis]

Hi,
I am upgrading my system from BC9 to BC12.1. Everything is working fine, but in BC12.1 I cannot make outgoing calls through a 2B+D route I had configured for AXE public system.

I guess it´s a configuration problem, as it worked fine in BC9 and it does no longer work in BC12... My route configuration is:

<RODAP:ROU=12;
ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
12 SL60 H'00000814 H'04C00000 H'424900A0 NO

END

<ROCAP:ROU=12;
ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
12 0110100001000011 5 1101000001 0 30 128 00151515 011110000030 101110

Does anyone have a valid 2B+D route for BC12 with AXE public system?? Or anyway, can anyone help me please??

Thanks in advance,

 

[whosrdaddy]

try these (not guaranteed to work in your case):

VARC : 00000314
VARI : 16800000
VARO : 263100E0

--------------------------------------
What You See Is What You Get

 

[Runis]

Sorry whosrdaddy,

It does not work. The link is IDLE/FREE, I can dial the whole number, but after a while in silence, I get the three tones that indicate the call is aborted.

I tried with different ROCAI/RODAI configurations but there is no way. I must be missing something!!!!!!

Thanks for your help,

 

[whosrdaddy]

you're sure about the AXE side??

--------------------------------------
What You See Is What You Get

 

[Runis]

Yes, that is what my service provider says...

Thanks,

 

[whosrdaddy]

what application system are we talking about? (country)

--------------------------------------
What You See Is What You Get

 

[Runis]

Spain

 

[whosrdaddy]

try these then

VARC : 00000814
VARI : 04C00000
VARO : 42490000

--------------------------------------
What You See Is What You Get

 

[Runis]

I already tried that one, and it does not work either.

What about ROCAI???

Thanks for your help,

 

[whosrdaddy]

this is a rocap from a customer who has an AXE :

[tt]
ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
60 5120000100000010 5 2102000001 0 30 128 03151515 311110000030 111111

[/tt]

but I don't see anything wrong with your config...

try to make a call trace to see what happens :

STISR;
STUNI:UNIT=SLP60,LIM=x,MSKSIG=02&03&A1,STORE=YES;
STTSI:TRI=1;
/* make call
STTSE:TRI=1;
/* open logfile
STRAP:TRI=1;
/* close logfile

you can paste the results here if you want.



--------------------------------------
What You See Is What You Get

 

[Runis]

Hey, it works now!!!!!!!!

Thank you very very much...

I have compared your ROCAI with mine, and changing bit a bit, I have found that it was the las digit of the SEL which was making my route go wrong (it´s about "route to telident machine for emergency calls").

Thanks a lot,

 

[whosrdaddy]

np man, I'm glad I could help you.

Cheers,

Daddy

--------------------------------------
What You See Is What You Get