TLU64 to TLU76

[mushobeti]

Hi all!!

I need to change one old TLU64 card with a newer TLU76 card in a BC12+ system. How can I do this? If I simply plug the new card, will it work correctly?

Thanks and regards!

 

[5755g]

hi
first remove all setings and equ tlu64
roeqe:rou=x,tru=x-x;
rodde:dest=x;
cnboe:bpos=x.x.x;
route:rou=x;
now remove card tlu64 and install tlu 76
if you want use replace card
install tlu76 card
rodai----
rocai----

roeqi:equ=x.x.x.x,tru=x-x;
roddi:dest=x,rou=x;
rodni:rou=x,day=x,nig=x;

 

[fcpli]

5755g,

No, just remove the equ (roeqe), then cnboe the board, initiate with cnhui:bpos=xxxxxx, then roeqi.
Why rodde,rodai, rocai etc?

 

[mushobeti]

OK, thanks a lot. Another question: our pbx is an old /20 cabinet. Is it necessary any CCU card to get the TLU76 working?

Thanks again!!!

 

[fcpli]

In my opinion just connect the cable to the other end.

fcpli

 

[Satellite1900]

As the saying fcpli
no you do not need to connect the CCU to the tlu76

\Satellite1900