TLU 80 to Ascom PX

[lcns]

Can anyone supply PASAI and TLU 80 1/4 connector programming and wiring to the Ascom 942PX module?

 

[andrels69]

Referring to cable pin you can follow this pattern below;
C32 M0
C30 E0
C28 lb10 RX
C26 lab10 RX

A32 lb20 TX
A30 la20 TX

This pin-up form the channel 00 of plate 80 TLU or other equipment for you turn. Eg: In 28 of the pin 80 is the RX TLU then you should connect to pin the other equipment in TX, same thing happens with the Pino 32 to 80 TLU in M0 is you must connect the pin E0 other equipment.


Now for the command PASA going gets tricky because I do not know your region. Maybe some of our colleagues have already bridged this equipment. Here in Brazil a long time ago that no longer uses this type of link, and even then I have been implanted in Cisco router and MOTOROLA.

Para não dizer que eu nao tentei seguem uma dica do comando PASAI;

PASAI : SAR=7, TYPE=PG1, VAR=0000123001, THO=111089, TBL=0;

André Luís - Proud to be Brazilian

 

[lcns]

This is an italian application system using ESPA protocol, can you provide any information based on ESPA?

 

[andrels69]

No.

The sample was extracted from ALEX!

This equipment is not sold yet at least in BRAZIL!