Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
TLS with J Series on SE 2
- Thread starter JeffsBand
- Start date
I believe the biggest thing is to add "SET TLSSRVRID 0" in 46xxspecials.txt
If this step is viewed as a security risk, you would need to go through 46xxsettings.txt and find any references to the server edition IP address. You would then create 46xxspecials.txt lines that point to the FQDN instead (and of course you need a proper SSL certificate for that FQDN).
-----------------------------------
Business Phone Systems for Canada
If this step is viewed as a security risk, you would need to go through 46xxsettings.txt and find any references to the server edition IP address. You would then create 46xxspecials.txt lines that point to the FQDN instead (and of course you need a proper SSL certificate for that FQDN).
-----------------------------------
Business Phone Systems for Canada
-
2
- #3
If you aren’t able to get a certificate with IP as SAN you can set the NoUser Source Number „ENABLE_J100_FQDN“ and the 46xxsettings.txt will push the IPO FQDN (if set) as server to the phones.
IP Office remote service
IP Office certificate check
CLI based call blocking
SCN fallback over PSTN
IP Office remote service
IP Office certificate check
CLI based call blocking
SCN fallback over PSTN
@derfloh: That is great to know!
-----------------------------------
Business Phone Systems for Canada
-----------------------------------
Business Phone Systems for Canada
- Status
Similar threads
- Locked
- Question
