TLAN

[ReenaS]

If I wanted to change my tlan settings from auto negotiate duplex to Full Duplex, is this sufficient enough:
tlanDuplexSet 0, or do I need to disable the auto negotiate setting first?

Alsom do I need to manually save this setting or since I am telneting to the card, the change is immediate?

HELP!

 

[johnpoole]

the change will take place on the next reboot, unless that has changed.. but the tlan should not be switched, it should be be a direct connect through a 100 meg hub, auto should not be a problem unless your trying to vlan it through a layer 3 device.. i wouldn't, the books are very clear on that one

john poole
bellsouth business
columbia,sc

 

[unkalary]

NORTEL will tell you to always set TLAN port settings to AUTO NEGOTIATE. If you hard code it, it could and I have had this problem, a mismatch can occur on duplex settings. It will greatly degrade you network.