Timer / Process Current on a table via EIS

[pys]

Can I write EIS script to :

1. Switch to a query page / linked table
2. Put a message box to tell the user to "Press Process Current"
3. Switch back to the original front page after 10 seconds once the user has pressed "Process Current"


- I tried to write an EIS command to automatically "process current" on a linked table, but was told you can only do this for a query, not a table. (btw you can get it to work manually.)

The table is a .csv file that gets updated & I want to automatically refresh the table in brio that displays it.

 

[jrozee]

I haven't tried it but you could try to remove the Section and then import it using the ImportDataFile() method.

James