Time loss on a Sucession 1000M Single-group 2

[Fineau]

I have a 1000M Single group that loses about 3 minutes a week. The PBX is running Rls 4.5 and has a CP-P4 processor. The Problem has been on-going since the Install.

 

[bigindian65]

Have set a daily time adjustment?

Mato' Was'aka

 

[bigindian65]

if you are losing 3 minutes per week goto ld 2

TDTA

If it comes back 0 XXX it is set for a positive increment.

if it does not look like it is setup to a negative setting

set it for - SDTA 1 050

This will give you positive 30 seconds per day, tweak it after watching it for a week.

Mato' Was'aka

 

[bigindian65]

If it comes back 0 XXX it is set for a positive increment.

I MEANT IT IS SET FOR A NEGATIVE INCREMENT

0 -

1 +

Mato' Was'aka

 

[Firebird Scrambler]

There was a patch for this. It's Rls 4.50 P23200_2 It was supposed to be fixed in Rls 5.00

i.e.

Brief Detail....Since upg to 4.5 and CPP4 Time Drift
Condition..CS1000M 3621 CP4 Rls 4.50W
Action....None Specific
Expected Response....Norm Clock
Actual Response....Clock runs slow/fast
Add Info...
We have seen clock drift slow since we have had
4.5 cpp4 can be 2-4 minutes per week.


All the best

Firebird Scrambler
Meridian Programmer in the UK

http://mysite.orange.co.uk/firebird_scrambler

Useful Nortel forum at

http://www.tspforum.com

If it's working, then leave it alone!.