Time limit for international calls

[sozmena]

Hi all,
I want make a time limit for international calls.
(For example 5 minutes)
How to do it ?

Thanks in advance and my best regards.

sozmena

Share what u know, learn what u don't

 

[manfmmd]

If you have a specific Trunk Group built up for International Calls, you can use page 2 on the COR form:


Outgoing Trunk Disconnect Timer (minutes)
This feature provides the capability to disconnect an outgoing trunk automatically after an administrable amount of time. This field defaults to blank (outgoing trunk calls are only disconnected when dropped by one or all parties), or you may enter a timer value in number of minutes to apply to outgoing trunk calls if the initiating party belongs to this COR.


Valid entries Usage
2 through 999 Enter a value of as many as 3 characters in number of minutes. A warning tone is given to all parties on the trunk call 1 minute before the administered value (i.e., after 1-998 minutes have elapsed) and a second warning tone is heard 30 seconds later. The call is automatically disconnected 30 seconds after the second warning tone.


Hope this helps.

manfmmd

 

[sozmena]

Hi,
In my COR form page #2 there is no field like
"Outgoing Trunk Disconnect Timer", so I could not do
anything about it, so are there any other solutions ?

Thanks in advance,

sozmena

Share what u know, learn what u don't

 

[manfmmd]

What platform and revision is your PBX?

 

[sozmena]

It is Definity G3siV8

Share what u know, learn what u don't

 

[AvayaArmy]

That option is not available on G3siV8. I guess it's available from version 9 onwards.

 

[skara]

Hi

We are running V11 and this option is not on the COR form either???

 

[manfmmd]

After looking through my PBX's, only my S8700 has that option. Sorry.


manfmmd

 

[Definity]

I have G3si with R11 & I have the option, However we had to upgrade the load to 531.0 to support this.