Time & Date not set 1

[d101]

How to set the time and date in MD110 ???

 

[MDadmin]

Just execute:
CATIIATE=,TIME=;

 

[d101]

Thank for your prompt reply. What is the format for the date and time ???

 

[d101]

Just execute:
CATIIATE=,TIME=;

I had the error missing parameter DATE TIME CALIB

what is the CALIB --- mean ?


What are the format ??

CATIIATE DD/MMM/YYYY, TIME=HH:MM:SS ????

Thanks ??

 

[whosrdaddy]

CATII:TIME=11-00,DATE=2004-05-04;

cheers

--------------------------------------
What You See Is What You Get

 

[d101]

Thank It's works.....

 

[aprasha]

From Alex:
"The exactness of the calendar clock depends of the precision of the LPU board crystal. To avoid deviation, the calendar clock can be calibrated via command CATII . The calibration process is initiated when a BEGIN time is entered and terminated when an END time is entered. If there is a discrepancy between the system time and the END time then the real time clock is out of calibration. The system calculates a correction factor and adjusts the speed of the clock accordingly.
A longer calibration time gives a more accurate calibration. "

CATII:..........,CALIB=BEGIN; for starting calibration

CACAP; Prints out calibration data

CATII:..........,CALIB=END; for ending calibration

 

[rfpui]

... And min calibration time (from BEGIN to END) is 72 h

 

[aprasha]

72h?
Wich version?
Alex for Bc8, 9, 10 & 11 tells it's only 55h...
Maybe 72h for higher versions?

Regards.