I have 5 sights with Inter-Tel AXXESS's that are tied together with T1's, I am interested in putting a T1 in to tie one of the AXXESS PBX's to a Nortel Option 81C. The Inter-tels are able to five digit dial to each other and i'm looking to make the Nortel to Inter-tel as transparent as possible. Has anybody out there done this already or have any suggestions? changing the Nortel to an Inter-tel isn't even an option.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
tieing Nortel 81C to an Inter-Tel
- Thread starter telman22
- Start date
yes you'll need a combination of pri's and dsc's.. names and dn's will show across the d channel without much hassle, with a clean 5 digit numbering plan you'll just need to route remote numbers to the pri.. not that hard fi you need pointers just post ?? if you get stuck
john poole
bellsouth business
columbia,sc
john poole
bellsouth business
columbia,sc
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
- Question