We have a remote location with an Opt11 connected to our CS1000 and Call Pilot system through a point to point T1 plus 12 lines into a channel bank. There are about 20 users but only about 7 are ever on the phone and rarely at the same time and they do not use the desktop messaging features. I am wondering if we can run everything over the point to point.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Tie Lines
- Thread starter lenzhin
- Start date
Depending on your traffic, but with the stats you provided, you should be able to take everything over the P2P. We have 50+ users at multiple field locations doing it with no issue.
Just monitor your traffic load closely after the conversion, and you may want to keep the channel bank in standby for a week until you are satisfied.
Just monitor your traffic load closely after the conversion, and you may want to keep the channel bank in standby for a week until you are satisfied.
oldestgeek
Technical User
Are you using the P2P as a tie line or is carrying SIP trunks as well as data traffic? What compression are you using?
- Thread starter
- #4
- Status
Similar threads
- Locked
- Question