Hi there..
Has anyone ever had any throughput issues with Backup Exec?
I have a Win2K server with Backup Exec driving either HP-818's or Quantum 8000 tape devices.
These are connected via a fast SCSI buss (Adaptec 39160/3960D Ultra 160)
I am currently getting around 300 - 350 Mb/Min as a transfer rate in the activity monitor.
This is causing a huge issue as the backup jobs are overrunning etc...
does anyone have any ideas of other things to check?
I have done the usual:
SCSI drivers
SCSI BIOS
Checked Network settings (1Gb/s Full Duplex)
Backup Exec Ver: 8.60
There doesn't seem to be any pattern as to when/why this is happening.. I am gettting the same issue on several devices/servers with differing hardware, but similar configs.
Any help is gratefully recieved.. cheers
Has anyone ever had any throughput issues with Backup Exec?
I have a Win2K server with Backup Exec driving either HP-818's or Quantum 8000 tape devices.
These are connected via a fast SCSI buss (Adaptec 39160/3960D Ultra 160)
I am currently getting around 300 - 350 Mb/Min as a transfer rate in the activity monitor.
This is causing a huge issue as the backup jobs are overrunning etc...
does anyone have any ideas of other things to check?
I have done the usual:
SCSI drivers
SCSI BIOS
Checked Network settings (1Gb/s Full Duplex)
Backup Exec Ver: 8.60
There doesn't seem to be any pattern as to when/why this is happening.. I am gettting the same issue on several devices/servers with differing hardware, but similar configs.
Any help is gratefully recieved.. cheers