Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
thread1613-1675741 Hi I am faili
- Thread starter Chamvari
- Start date
Hi Chamvari,
The process is simple as registering the LIP-8002 SIM phone.
On the LIK side:
1. Setup the Station User Login (PGM 443) with ID, Password and desired number (this should be the station number)
On the ACT50 side:
1. In the network configuration setup IP addr, net mask and GW.
2. Reboot and logon to the web server
3. Setup the Proxy Address (which should be the LIK IP addrss) and SIP port 5060.
4. Setup display name (your choice) and Name (User ID), Authentication Name (ID) and Auth. Password, which should be the same as set on the LIK (PGM443)
5. Reboot the phone and you should be ready to go.
Cheers,
Ivo
The process is simple as registering the LIP-8002 SIM phone.
On the LIK side:
1. Setup the Station User Login (PGM 443) with ID, Password and desired number (this should be the station number)
On the ACT50 side:
1. In the network configuration setup IP addr, net mask and GW.
2. Reboot and logon to the web server
3. Setup the Proxy Address (which should be the LIK IP addrss) and SIP port 5060.
4. Setup display name (your choice) and Name (User ID), Authentication Name (ID) and Auth. Password, which should be the same as set on the LIK (PGM443)
5. Reboot the phone and you should be ready to go.
Cheers,
Ivo
- Status