Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

The device, \Device\Harddisk0\DR0, is not ready for access yet.

Status
Not open for further replies.
cdubb

cdubb

MIS
May 6, 2004
21
US
Has anyboty seen this error? Would you suggest the raid controller. It is a Compaq 6400 running raid 5 config. Any help would be appreciated.....
 
Sort by date Sort by votes
No, this drive has not been replaced. Is there a way to determine if the error is being generated by Windows or the Array Controller?
 
Upvote 0 Downvote
This sounds as if the HDD is not spinning up in time, try checking the HDD SCSI BIOS settings in the Configuration utility
 
Upvote 0 Downvote
ALso check to ensure the hard drive is not "clunking" - it may not be spinning properly due to an imminent failure of the drive.

-----------------------------------------------------
"It's true, its damn true!"
-----------------------------------------------------
 
Upvote 0 Downvote
Thanks guys. I'll replace the drive and monitor the event log.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

jackysins1
  • Locked
  • Question
Server Issue
Replies
1
Views
121
goombawaho
goombawaho
Kiran Angara
  • Locked
  • Question
Hyper-V Internal Network Ping Issue On WS2019
Replies
0
Views
104
Kiran Angara
Kiran Angara
Barnegat Tech
  • Locked
  • Question
Server Authentication Issue 1
Replies
0
Views
100
Barnegat Tech
Barnegat Tech
jrosenberg70
  • Locked
  • Question
SUN 220R Power Issues
Replies
0
Views
76
jrosenberg70
jrosenberg70
BULOS
  • Locked
  • Question
Besoin d'un CD smartstart V. 4.9 en ISO
Replies
0
Views
79
BULOS
BULOS

Part and Inventory Search

Sponsor

Back
Top