Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

The call redirected automatically

Status
Not open for further replies.

Ali. Ibra

Programmer
May 1, 2021
147
SY
Hello my friends so i have panasonic 308 easa phone, and my problem like this.
When the incoming call ring in the master phone, after 3 or 4 second the call redirected to another extension automatically, so how can i disable this..?
 
Mr Mike now i have this situation.
When a call came to my pbx system all connected phone ring..!
So how can i make only the master ring..?
Something to know that despite that i have panasonic 308 ease the connected master phone is kx-t7731.
So until now i couldnt know how to program the pbx from this phone.
 
Hello Mr Ired...!
Its along time..! Well i have this manual and i searched alot but with no avail.
 
Well, carefully check pages 2-3 and 2-15 of the manual.
 
There's two ways that a call can forward. Either the call forwarding in FWD/DND, or the intercept destination in extension settings.
 
Hello my friends..!
So as i mention previously despite the pbx is ease phone 308 the master extension is kx-t7731, i apply the steps Mr Ired in the manual above. But i couldnt enter to prog mode in kx-t7731.
When i put the pbx to prog mode if i press any key in the kx-t7731 it give me the message Day-mode.
 
Did You press the "Program" key on KX-T7731?
 
Yes i do, and it give me a prog mode message on display, and when i try to enter any key no thing happen just freezing on this prog mode display.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top