Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

the 1st 2 digits are being replaced with 99 1

Status
Not open for further replies.

jackie1983

Programmer
Nov 17, 2012
36
and Suddenly it is happening

When an user is calling a mobile number starting with 0502XXXXXX, first of all the call does not even go outside. The second thing is that when the call monitor is referred, the 1st two digits are stripped off and is replaced with 99 such that the number becomes 9902XXXXXX. Normal Analog trunks are in use and the telephone sets used are 1408 and admin software version is 8.0.44. One more thing, out of the 2 DS30 expansion modules, one has been given for replacement and still it is visible in the admin software.

Can anyone give us a solution.
 
The IPO will prefix inbound numbers in the options for the LINE.
Outbound number matching and manipulation will be done with Shortcodes, either in System, User, or ARS.



ACSS - SME
General Geek



1832163.png
 
This is IP Office 101 - as an experienced installer / maintainer you MUST be conversant with the basics like this.

ACSS - SME
General Geek



1832163.png
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top