TFTP file selection

[telnettech]

Is it possible to have a phone look for a specific .cnf file based on the IP that was assigned during DHCP?????

What I am wanting to do is if the IP address is say 192.168.1.xxx to get MGCDefault1.cnf and if the IP address is say 192.168.2.xxx to get MGCDefault2.cnf..... I want a certain range to go to 1 Edgemarc and another range to go to a 2nd Edgemarc.... The softswitch that it registers to will be the same for both ranges.

Thanks
Brian

To error is human.....if the machine doesnt work, then KICK IT !!!!!!!!!!!!!

 

[whykap]

Point them to a different TFTP server then. DHCP scope A goes to one TFTP server and DHCP scope B to another TFTP server. Each TFTP server has the appropriate .cnf file.

 

[telnettech]

trying to avoid having to setup a different TFTP server.

Any other ideas on how I could accomplish this?????

To error is human.....if the machine doesnt work, then KICK IT !!!!!!!!!!!!!

 

[whykap]

No sorry I don't know a thing about edgmark softswitches. The phone is just an endpoint so it takes all the configuration from the phone system. Now I assumet that this is SIP registered phones but you'll have to reference the softswitch admin guide on how to do that.