TFC

[krasemeer]

In RLS 5 do i have to logi with PWD2 to change the time ?
this what i`ve got when i want to change the date &time:

TFC000
.ttad SUN 30 03 2008 11 54 24
.stad 30 03
ERR193 Invalid NTP table
any idia about that will appreciate.

 

[acewarlock]

STAD 30 03 2008 13 45 24





This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.

 

[krasemeer]

yes acewarlock, i know that , but when i want to continue with writing 2008 i get this message , and can`t complete it.

 

[krasemeer]

yes acewarlock, i know that , but when i want to continue with writing 2008 i get this message , and can`t complete it. need expalanation for this : ERR193 Invalid NTP table

 

[GHTROUT]

Have not seen it first hand, but there are some NTP (Network Time Protocol) commands in LD117....

=> ENL NTP
=> DIS NTP
=> STAT NTP

See if that leads you anywhere.

There is a custom compilation of the basic books for Rls5 here:

http://www.ghtrout.com/micromerl/

GHTROUT.com | FAQs | Recent Replies

 

[MagnaRGP]

And, yes, for some reason, you need an L2 password to change time and date on rel. 5.0.

Prolly something to do with LAPW users changing the time back an hour and crashing their symposiums....