Testing Auto Attendant 1

[Danny28]

I have created an AA2. I want to test it out before activating it for our phone lines. We use a fractional T-1 with DIDs. We have one main number that has all calls initially answered by AA1.
How can I test AA2? If we had POTS lines, I know I would just reassign the appropriate line and number to the autoattendant, but that's not our set up.

How do I change the system so that AA2 answers the calls.
Currently there are two phone lines 801 and 802 that are assigned to AA1. When I tried just assigning them to AA2, AA1 still picked up the calls.
We have Merlin Magix and Messaging 7.

 

[TouchToneTommy]

Renumber an adjunct to something in your DID range and cover it to voice mail. Create a mailbox that points to AA2. You can call the extension locally or dial out and back in on the DID.

 

[Danny28]

How do I make a voicemail box point to AA2?

 

[Pepperz]

When you set up the voice mail box, it asks you if this is to be an autoattendant, then it asks you wich one.

Pepperz at newper dot net