Test Case: same configuration 406 and 500 different result.

[unconcerned]

Test case:

Using version 4.1 and manager 6.1 with vmpro
module XX1 has 1 generisch and then transfers to a mobilephone (0)06543N

situation 406 with configuration:

incomming callroute
line-id 0
incoming number: 1234567
destination VM:XX1

SC:
0N dial N id=0

---------------------------------
Dialing from ext 504. (0)1234567

call is being anwsered by XX1 and im forwarded to the mobile (0)06543N
Everything is normal.


Now the same configuration on a 500:

incomming callroute
line-id 0
incoming number: 1234567
destination VM:XX1

SC:
0N dial N id=0

dialing again from ext 504 (0)1234567

call is being anwsered by XX1 but the moment i get forwarded to the mobile i get a disconnect.

-----------------------------------------------
Wenn i dial from outside for example from mobile with number 061034N to both 406 and 500 my call is nicely anwsered by XX1 and then forwarded to mobile (0)06543N like it should do.


There is no SC ? dial . nor in users or ars

suggestions where to find the problem of the disconnect in the 500?

 

[unconcerned]

BTW if i make a SC *93 to go to module XX1 in both 406 and 500
and i dial it i get the generisch and then get forwarded to the mobile (0)06543N it works

 

[intrigrant]

It would be more appropriate to post your problem to the Avaya NPI crew as 4.1 is still under beta test.

Het lijkt mij verstandiger om het probleem te posten bij de Avaya NPI mensen omdat 4.1 nog in test is.

NIHIL NOVI SUB SOLE

 

[unconcerned]

you are correct i forgot the 0 `

version 4.0.10 it is