Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

TES 824 jack 01 operator console kx 7730 busy solution

Status
Not open for further replies.

Nadeem khattak paki

Programmer
Sep 20, 2019
12
PK
i have panasonic TES-824. how it possible that jack 01 operating console installed at reception whenever busy call waiting is activated and other internal extention user when dail 0 the call need to made.
 
You have to Enable this feature to Operator's Telephone (Jack 01).
PGM 731 - Call Waiting from CO-line
PGM 732 - Call Waiting from Extension
(See Feature Manual, Section 1.1.3.5)

When other Extension calls to an Operator and hears a Busy Tone it should press "2".
(See User Manual, Section 1.2.4)
 
thanks for that but my question is that without pressing figure 2 call waiting is received with only dialing figure 0 it is possible as we dial in TDA or NS series?
 
TES824 doesn't have an "Automatic Call Waiting for Extension Calls" feature.
Only manual CallWaiting is available (by pressing "2" when hear a Busy Tone).
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top