terminating a 2 wire digital card

[definity1bod]

Hi

i just wanted to know how to terminate a 2 wire 24 port digital card i.e. what colours in what order ..

Thanx

 

[mikeydidit]

24
Port
2 Wire
Digital
TN2224
24
Port
Analogue
TN793B
T1
R1
T2
R2
T3
R3
T4
R4
T5
R5
T6
R6
T7
R7
T8
R8
T9
R9
T10
R10
T11
R11
T12
R12
T13
R13
T14
R14
T15
R15
T16
R16
T17
R17
T18
R18
T19
R19
T20
R20
T21
R21
T22
R22
T23
R23
T24
R24
GRD
GRD

This is the layout that you are looking for. You would use pairs 1-24.


Mike Jones
LSUHSC

 

[dufus2506]

This web page may have the information you are looking for.

http://support.avaya.com/elmodocs2/definity/def_r10_new/easy_3/OutputInstallMCC/InstallCabling3.htm

Your best bet, (and far easier thing to do) would be to buy some 25 pair cables with amphenol connectors on them. Then buy a 110 wiring block with amphenol connectors as tails.

Mount the block, run the 25 pair cable to the tails and connect the ends of the cables together. All the wiring to the 110 blocks would be done in one step.

Connect the other end of the 25 pair cable to the back of the system and your ports will be wired exacly as they should be.

Carpe dialem! (Seize the line!)

 

[dufus2506]

Oh, but if you have all the bits and pieces to assemble your own wiring, check out this page:

http://www.la-cable.com/telephone_technical.htm#AT&T telephone color code for 25 pair cable

It has all the color codes you'll need and the prder you'll find them for the port/pair that mikeydidtit listed above.

Carpe dialem! (Seize the line!)

 

[definity1bod]

thanx