Terminal won't connect to file server

[TXKaiyote]

Hi,

I recently had to replace one of my terminals. After copying all the necessary files, I have been unable to get the terminal up and running. At one point, I did have it connected and running for several hours. However, when everything restarted this morning, that one terminal did not start up. It finds the "master" but is unable to get the file server info. Here's my debout info:

Jul 15, 11:11:35 IBER started (robust mode)... version 4.268b

Jul 15, 11:11:42 Determining Master And Fileserver
Jul 15, 11:11:42 Local DOB is 7/14/2008 in C:\Aloha\DATA\ALOHA.INI (07 14 2008)
Jul 15, 11:11:42 Creating terminal status for 3
Jul 15, 11:11:42 Creating terminal status for 8
Jul 15, 11:11:42 Creating terminal status for 6
Jul 15, 11:11:42 Creating terminal status for 4
Jul 15, 11:11:43 Creating terminal status for 1
Jul 15, 11:11:43 Terminal 1 asserts 1 is master
Jul 15, 11:11:43 Master terminal is 1. Now determining fileserver...
Jul 15, 11:11:43 Master Terminal 1 asserts fileserver is 'boh_server'
Jul 15, 11:11:43 Attempting to connect to server 'boh_server'...
Jul 15, 11:11:43 Drop connection of Z: to \\boh_server\BOOTDRV returns 0
Jul 15, 11:11:44 Successfully connected Z: to \\boh_server\BOOTDRV
Jul 15, 11:11:46 Couldn't find \\TERM1... assuming master down
Jul 15, 11:11:46 Removing master 1 from termstatus
Jul 15, 11:11:46 net shutdown!
Jul 15, 11:11:46 Canceling datagrams...

I am able to manually connect to \\boh_server\BOOTDRV.

Anyone have any ideas?

Thanks

 

[TXKaiyote]

Forgot to mention this is on Aloha 4.268.

 

[IndexRobert]

actually, it seems to connect fine to the fileserver, just not to the master terminal

 

[Circle9]

The debout says it assumes the master is down...

 

[posrescue]

Looks like the Aloha drive on terminal 1 is not shared as "bootdrv" with full access.

 

[jjr2144]

I would make sure that all terminals have a mapped drive to the server....ie...z:\\alohaboh\bootdrv

Then check to see if all terminals are using or have the same user and password accounts set up