ryanmcfarland
IS-IT--Management
I need to know how to open port 3389 on a Lucent CellPipe for use with terminal services. If anyone can help please let me know.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Terminal services through Lucent Cell Pipe.
- Thread starter ryanmcfarland
- Start date
- Status
Hello,
Recommend you use following command:
pat addpatin <pppoe/pppoa/wanip> port/protocol <serverip>
ergo, if you're a pppoe service and your server is 10.0.0.10, then you'd do this as follows:
pat addpatin pppoe 3389/tcp 10.0.0.10
Hope this helps
BK
Recommend you use following command:
pat addpatin <pppoe/pppoa/wanip> port/protocol <serverip>
ergo, if you're a pppoe service and your server is 10.0.0.10, then you'd do this as follows:
pat addpatin pppoe 3389/tcp 10.0.0.10
Hope this helps
BK
- Status
Similar threads
- Locked
- Question
- Locked
- Question