Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Terminal Server issue with disconnected sessions

Status
Not open for further replies.

astaylor

MIS
Mar 14, 2007
138
US
Current setup. Terminal Server 2003 and RDP 6.

When a user disconnects from our terminal server and reconnects back it brings them right back to where they left off as it should. But after about 5-7 seconds rdp just closes. It does not send the session into a disconnected state. When the user logs back all the logon scritps run and they are at a new session with all data lost from their previous one. This does not happen with a machine that has rdp 5.2 on it, but we currently need RDP 6 to use to /span feature for dual monitors.

Has anyone else ever had this problem? It happens every time and for all users. Its not sporatic.

-drew

MCSA 2003: Messaging
 
Thanks for responding TopKatz.

I figured out the problem. Heres the answer in case anyone ever happens upon this problem.

We use a program called Screwdrivers for printing in Terminal Server. The problem we were having was only happening for 1 of our servers and not any of the others. This was due to installing Screwdrivers in "Install" mode. There is nothing about this on their knowledgebase anywhere and their instructions for installing do not mention whether to use Install mode or not. Reinstalled not in Install mode and all is fine now. Wierd.

-drew

MCSA 2003: Messaging
 
Im glad you solved your problem.

Printing was a big hurdle for us with TS. In the end we used print servers at our remote locations, and installed them as local ports on the TS.

The printer port mapping native to TS is really bad.
 
I agree. Printing was a nightmare, but Screwdrivers works very well for us. Expensive product though.

-drew

MCSA 2003: Messaging
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top