For some reason I'm not able to get into either of my 4000 series routers. I think it might have something to do with the "reset" start-config file and ever since it I have been unable to get into the routers. Just a note, I was using the aux port to do config's b/f and now I can't get in at all. Any suggestions? I'm not having any issues w/ my 2500 series router. Thanks in advance.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Terminal problems w/ 4000 router 1
- Thread starter pjstudley
- Start date
-
1
- #2
Infinity123
IS-IT--Management
You blew away the config on the aux port and will now have to use the console port.
- Thread starter
- #3
I'm still having trouble getting in now on the console port which on this router is a parallel. I'm trying to connect w/ a straight through parallel cable that eventually turns into a serial b/f connecting to my computer. Do I need a parallel to RJ-45 connector similar to the one I use for my 2500? Thanks.
- Status
Similar threads
- Locked
- Helpful tip
- Locked
- Question
