Terminal Connection to 64 port Async Controller 1

[itdirector]

I am relatively new to the RS/6000 is it possible to directly connect a WYSE 60 terminal to the 64 port Async Controller on the RS/6000 and if so what is the pin out. Thanks in advance for any help.

 

[robinz]

I am assuming you have standard IBM RJ45 to 25-way D type interface cables. If so, this is what works for us :

1 - cable shield - 1
2 - txd - 3
3 - rxd - 2
4 - rts - 5
5 - cts - 4
6 - dsr - 20
7 - gnd - 7
8 - cd - 20
20 - dtr - 6 and 8

If you don't have std IBM cables then I have details of them as well if required.

Regards,

Robinz

 

[aixqueen]

You are talking about the 64 Adapter.....with the 16 port concentrators? Yes
they still work.... Here is what I have on file for them....not sure it helps...but good luck

------------------------------------------------------------------------------

__7__6__5__4__3__2__1__0_ <-- Ports
64Port 1______N_____| | other side
Controller 2 | 8 9 10 11 12 13 14 15 |
3 |__|__|_____|__|__________|
__ 4 | | | |__P________D____ Modem
||||||||||||| || | | |__P____ _____D_
| |__YY__ Modem |E Term/Printer
|
| _______XX___ Term/Printer


------------------------------
Cable-N 64-Port Controller to 16Port Async Concentrator
PN00G1109 - 25ft FFC265

| Xmit Data A | 1 --> 1 |
| Xmit Data B | 2 --> 2 |
| Shield | 3 3 |
| Xmit Clock B | 4 --> 4 |
| Xmit Clock A | 5 --> 5 |
| Unused | 6 6 |
| Rcv Data - B | 7 <-- 7 |
| Rcv Data - A | 8 <-- 8 |
Cable: 6 conductors, 3 twisted pairs,
shielded outside.
<1000ft........... 28AWG
>1000ft <2500ft... 24AWG
Toroid: <6inch of concentrator
===================
Cable-XX 16port Concentrator EIA-232 Printer/Terminal Cable
(This cable doesn't need an interposer)

concentrator end RJ-45 Total capacitance:2500 picofarads
______ Cable max length: 200ft 28AWG
| Shld Gnd | 1 | Float* |
| RTS | 2 | 5 |
| RxD | 3 | 2 |
| CD | 4 | 20 |
| Sgnl Ground | 5 | 7 |
| TxD | 6 | 3 |
| DTR | 7 | 6,8 |
| CTS | 8 | 4 |
*If shld gnd is connected to device pin 1, Leave system end to float.
the shield should be connected to the frame ground at one end only.

--------------------------------------------------------
Modem: 232 Cable yy rj45 to DB25
Total capacitance:2500 picofarads
______ Cable max length: 200ft 28AWG

| Shld Gnd | 1 | Float* |
| RTS | 2 | 4 |
| RxD | 3 | 3 |
| CD | 4 | 8 |
| Sgnl Ground | 5 | 7 |
| TxD | 6 | 2 |
| DTR | 7 | 20 |
| CTS | 8 | 5 |


*If shld gnd is connected to device pin 1, Leave system end to float.
the shield should be connected to the frame ground at one end only.

---------------------------------------------------------
Cable-P - RJ-45 to DB-25 Converter Cable
PN59F3432 - 1ft FFC266
concentrator cable end RJ-45
| Shld Gnd | 1 | 1 |
| RTS | 2 | 4 |
| RD | 3 | 3 |
| CD | 4 | 8 |
| Sgnl Gnd | 5 | 7 |
| TD | 6 | 2 |
| DTR | 7 | 20 |
| CTS | 8 | 5 |
--------------------------------
Cable-D Async EIA-232D/V.24 #2936
PN6323741 - 10ft FFC 259
| Shield Gnd | Shell Shell,1 |
| TD | 2 ------ 2
| RD | 3 ------ 3 |
| RTS | 4 ------ 4 |
| CTS | 5 ------ 5 |
| DSR | 6 ------ 6 |
| Sgnl Grnd | 7 ------ 7 |
| CD | 8 ------ 8 |
| DTR | 20 ------ 20 |
| RI | 22 ------ 22 |
------------------------------------------
Cable-E Printer/Terminal Interposer EIA-232 #2937
PN58F2861 or (Interposer Cable 00G2907) - 2&quot; FFC 261
| Shield Grnd | 1 Shell |
| TD | 2 -------- 3 RD |
| RD | 3 -------- 2 TD |
| RTS | 4 -------- 5 CTS |
| CTS | 5 -------- 4 RTS |
| DSR | 6 --+ |
|
| CD 8 --+---- 20 DTR |

| DTR | 20 -----+-- 6 DSR |
|
| +-- 8 CD |
| Signal Grnd | 7 -------- 7 SG |
===============================

You also need device driver.....
devices.mca.61fd ALL
@ 4.3.0.0 64-Port Asynchronous Adapter Diagnostics
@ 4.3.3.0 64-Port Asynchronous Adapter Software

#-)

 

[itdirector]

Thanks aixqueen I believe this is the information I needed.

 

[aixqueen]

Sorry my diagram got messed....I have to learn to proof read first.


__7__6__5__4__3__2__1__0_ <--
1______N_____| | other side
64 port 2 | 8 9 10 11 12 13 14 15 |
adapter 3 |__|__|_____|__|_ _______|
4 | | | |__P___D__Modem
| | |__P___D__E Term/printer
| |yy _ modem
| _______XX___ Term/Printer

#-)