Hi All,
Does anyone know of a way to temporarily suspend Co line ringing on an ACS R6 - and still allow intercom calls
eg: Conference room, Bed room.
Any help is always appreciated. Thanks!
Hi telman57,
How temporary? Line ringing assignments are not very hard to change for a one time event. If it's to cover for reception, why not program a cover button and remove ringing on that extension?
-Chris
if its the same extensions you want to toggle ring on and off you could do it with a night service group ,program them not to ring but put them in the night service group
keep the system on night ring when you want them to ring take it off night ring and they wont ring
Hey Everyone,
I appreciate all the suggestions (and anything else that may come to mind).
This is the situation. This was a residental install. It replaced a TIE system that the customer had for a lot of years. They were used to being able to toggle on/off the ring in the bedrooms,(22 Phones)and simplicity is a necessity.
I think I may be able to do something with a call forward (follow me [F11])key and a phantom extension.
I'll let you know how it turns out.
Hi skip555,
Sorry, added info. If a system password is also programmed, then users assigned to night service can only dial emergency numbers or system speed dial numbers without entering the system password first.
I burned myself with that one once. What a groan.
Now that telman has identified that it is a residential install, and the application is to toggle the ringers in the bedrooms, I can't see needing to use system password for any reason. The easiest way is as Skip suggested, program the bedroom phones for NO ring, add them to the Night Service group. Put a NS button on Ext. 10 and label it something like "Bedroom Ring ON".
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.