drwngflies
Technical User
I wanted to know if anyone else had any temerature problems with any brand 6600GT's. I bought a Leadtek 6600GT-AGP, and during benchmarks, and certain high-end 3-D games, I am getting 90'C+ temps. I am using Riva tuner to monitor the temps. as they occur. I am not O/C'ing this card, I am running it at 500/900 3-D. I contacted Leadtek about this, and they weren't very helpful: quote:"nVidia makes the chip", I did, however, get a recommended temp max from them: Leadtek: 85'C max/ nVidia: 90'C max. I have gotten 92'C temps at times during CounterStrike:Source/DOOM 3/ and in benchmark tests.
I run 2 - 80mm inlet fans(1 front,1 side panel),and 1 80mm exhaust (rear), along with the exhaust fan in the P/S. I then added another 80mm fan inside the case blowing directly across the 6600 only 1.5 inches away. It is drawing air from inside the case, but I thought the added airflow would alleviate dthe problem.
I am running the latest release drivers from nVidia: 71.89
I am also correct about the input voltage to the card : 1.5 v
Can anyone post their temps for comparison?
My specs:
GigaByte K8NS -939 M/B
AMD64 3000+ 1.8GHz
Leadtek 6600GT-TDH (AGP)
Corsair XMS PC3200 TwinX 512MBx2
L&C 450W P/S
X-Blade case - I did route all wiring all to one side for better flow
I run 2 - 80mm inlet fans(1 front,1 side panel),and 1 80mm exhaust (rear), along with the exhaust fan in the P/S. I then added another 80mm fan inside the case blowing directly across the 6600 only 1.5 inches away. It is drawing air from inside the case, but I thought the added airflow would alleviate dthe problem.
I am running the latest release drivers from nVidia: 71.89
I am also correct about the input voltage to the card : 1.5 v
Can anyone post their temps for comparison?
My specs:
GigaByte K8NS -939 M/B
AMD64 3000+ 1.8GHz
Leadtek 6600GT-TDH (AGP)
Corsair XMS PC3200 TwinX 512MBx2
L&C 450W P/S
X-Blade case - I did route all wiring all to one side for better flow