Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Teminating IP Extension to KX-TES824 as analog Trunk

Status
Not open for further replies.

Otoni

Technical User
Jun 18, 2012
224
UG
Hello Gents,

He is a client with a rather strange requirement.

This is a international NGO with several branch offices in different countries where they have remote IP Extensions.
The main system is seated in Ireland.
Locally, the client has an Analog system - KX-TES824.

The said IP Extension sits in Branch directors office. He would like that in his absence, the call is routed to the Operator's phone (Ext101) connected on the KX-TES824

Just wondering if there is someway to translate this IP Extension to Analog and connect to the CO Line port of the KX-TES824.

Any suggestions will be highly appreciated.

 
yes you can
1- if your ip ext is sip you can use voip gateway for convert that to analog ext you can see on bottom an example device for do....

2-if your ip ext is h323 you should use h323 gateway for convert thatr to analog see example on bottom
and all taht work simple and config in web
 
Is there a standard telephone connected to the ata box. If so the lead to that phone can plug into line port of the system and it will keep the number. If it is a sip phone then you would have to swap it for a ata and get the settings from head office
 
If this are sip you use any voip gate way just support sip etc... Newrack. Atcom. Hanlong. Grandstream. Sangoma. Digium ......
 
as inlsp0x said,it is sip, so you could set it up as an ata and connect it to the Panasonic system.
all you need is the userid, password and reg ip of remote system.

is there a vpn on site back to head office
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top