Telnet to a signalling server

[foleys]

I can telnet to the signalling server and then cslogin on to the PTY. I was wondering if there was a different way of exiting instead of going through PDT using the exit command in there

 

[riscyrich]

What system are you running ?

Rich

 

[foleys]

Sorry running a cs1000m with Rls 4. signalling server sse-4.00.55

 

[bignose21]

The comand to exit from cslogin back to the Sig server is

~.

This will drop you back to SS.

 

[foleys]

Thanks. It works great.

 

[Firebird Scrambler]

Using the Sig Server to access the Call Server is very good. Remember that you only have 30 Minutes before you are disconnected. You can also access Meridian Mail / Miran etc. However!. You must log out of them before your time runs out.
I now use Procomm Plus via the Uwin program with a script file that does all of the hard work for me. Procomm has a timer in the bottom right hand side of the screen, so you can see how much time has gone.

All the best

Firebird Scrambler
Meridian Programmer in the UK

http://mysite.orange.co.uk/firebird_scrambler

Useful Nortel forum at

http://www.tspforum.com

If it's working, then leave it alone!.