Telnet to 11c

[nortelcs100e5]

Hi it is 11c rls 24.24. IP`s and sub net mask are set to default in PBX, One PTY was also created in PBX and i can ping PBX from my computer. I tried ZOC and hyper terminal (TCP/IP) to connect but it pops error (i think error is connection refuse, in ZOC port was set 23 and i also tried 25,22 etc...). When i tired Telnet from my PC it also refuses.
Any help??

 

[tnphoneman]

Download PuTTY. It is free. You need to use Rlogin not telnet. This does not work.

Signature===========================================
Artificial Intelligence Is No Match for Natural Stupidity.

The latest survey shows that 3 out of 4 people make up 75% of the population.

The original point and click interface was a Smith & Wesson.

Red meat is not bad for you, it is the green fuzzy meat that is bad.

 

[GHTROUT]

Has your company deployed any desktop firewall software besides the Windows default?

GHTROUT.com | FAQs | Recent Replies

 

[EddieDuece]

We use ZOC. ZOC also uses the Rlogin protocol. Good scripting capabilities.

Under the host tab, the device type should be set to Rlogin. Emulation on mine is VT220

Under the login tab, User name should be CPSID.

The port off your ethernet switch needs to be set to 10/100 duplex.

 

[jamie2]

nortelcs100e5, as Eddie indicated, ZOC works, but you have the emulation set to Telnet and it needs to be RLOGIN. Switch that and it should work.

Please let us know if you get it working.

 

[EddieDuece]

huh?

 

[jamie2]

Meant, set DEVICE to rlogin and Emulation to VT220

 

[jamie2]

Don't huh? me. I had to set it for you too - Parrot boy!\

Get back to work Eddie.

 

[EddieDuece]

Are you in Littlerock knothead?

 

[jamie2]

is that you Mariuz?

 

[nortelcs100e5]

Hi all, Thanks for helping... I tried setting DEVICE to rlogin and Emulation to VT220 but still getting same message or rejection. I connected MY PC directly to PBX and i can ping.There is no firewall installed.
Regards

 

[yyrkroon]

do you have a pty built on the pbx?