Telnet Program that works with SX200 and TLS/SSL

[jhamilto]

Hello, i've tried several programs including the "telnet-tls" supplied with the phone system and I cannot seem to get past a variety of TLS/SSL errors.

Anyhow does anyone know of a decent terminal program that can connect to the SX200?

Thanks!!

Jim

 

[kwbMitel]

What software and system type?

On an ICP with current software you can use the web interface.

On an ELx with Ltw19 or older you'll never get the telnet software to work.

GIGO


*******************************************************
Occam's Razor - All things being equal, the simplest solution is the right one.

 

[TheMitelGuy]

Use HyperTerminal - works for ICP or TDM variants with no issues.

 

[jhamilto]

Hi, yes it does have the web interface, but i'd prefer to use telnet. I'm not sure of the version, but i know it can support telnet and tls or ssl as it gives me tls error.

 

[TheMitelGuy]

The ICP does support Telnet, but the older TDM version of the SX-200 do not.

On your PC, when connecting to the ICP, what command are you issuing in the Mitel supplied (**supported**)?

It should be in the form:
O <IP ADDRESS OF ICP> 2000

NOTE: the above leading O is a letter and not a zero.

 

[jhamilto]

Hi, ok the system is a:

SX-200_ICP_4.0.0.17

This is the output i get:

Telnet-tels Version 1.0.0.2

Loading configuration options from D:\src\pbx\Secure Telnet TLS\telnet.ini.
Loading ANSI from D:\src\pbx\Secure Telnet TLS\telnet.cfg.
Use configuration: ANSI.
keymap ansi
There are 1 maps.
telnet>o 10.0.3.2 2002
MiSslInit(): entry
MiSeedRand(): Start RandStatus = 1
MiSeedRand(): End RandStatus = 1
Trying 10.0.3.2:2002...
Connected to 10.0.3.2. Escape key is ALT-].

TLS/SSL Connected: Using cipher: AES256-SHA SSLv3 Kx=RSA Au=RS
A Enc=AES(256) Mac=SHA1
login: installer
Password:

Shell restarted
->

It seems once the shell is restarted, I am just stuck at the prompt.

I can type help for some telnet help, but can't seem to gain access to the PBX

Thanks!

Jim

 

[TheMitelGuy]

Why are you entering port 2002?

 

[jhamilto]

Well, that would certainly explain why i've been having these issue - not sure where i got 2002 from, but using 2000 works perfectly!

Thanks!!

Jim

 

[TheMitelGuy]

Hopefully you can mark the posting with a stair!

 

[kwbMitel]

Tp TheMitelGuy, So thats how you get to be #1 hotshot, Beg for stars.

Your #2 guy (but not for long)

*******************************************************
Occam's Razor - All things being equal, the simplest solution is the right one.

 

[nytalkin]

Mitel has a secure telnet on the web site go to MOL software downloads for 200ICP.

NO GOOD DEED GOES UNPUNISHED!

 

[M1tel]

You can use putty set on raw and this will work for you.