Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

telnet and ftp

Status
Not open for further replies.

Pit2855

Technical User
Mar 27, 2007
3
CA
I would like to know how to setup a direct connections using two ethernet cards? I am trying to telnet to another eternet card using a reverse cat5 cable but I don't have the options to specified the ip to telnet it ask for a com port.
 
no is not I trying to establish a connection via Procomm plus using erthnet card and after to a telnet or ftp
 
Procomm does not have the ability to receive telnet or FTP connections, only to make them. There is a piece of software called COM/IP that I think I link to from my site that will let Procomm accept a telnet connection (basically appears like a modem if I recall correctly), but I'm not aware of anything similar for FTP.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top