Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Teleworker - No speech transmission

Status
Not open for further replies.

Darby123

Programmer
Apr 14, 2011
26
GB
Hi All

I'm getting a bizarre issue when setting OXP to work as a Telecommuter client.

The IPO is on V9.1 and running Gamma SIP trunks

If I set my OXP to works as a telecommuter and enter in an external telephone number the call is not sucessful.

The inbound call gets presented to the OXP client, the destination number rings but on answering the call, the inbound call still hears a ring tone then hits VM after the user time out setting, the internal user gets disconnected.

Both Internal and Outbound calls are fine.

Any help would be apprieciated.

Thanks

Mark

APSS
PASMI

Aastra Accredited Expert
 
Yes RTP Keepalives are enabled

Scope - RTP
Periodic Timeout 10s
Initial keepalives - Enabled

APSS
PASMI

Aastra Accredited Expert
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top