Telephone Reports

[PeoplesBKTech]

I need to generate a report of Phantoms in the PBX, however I need it to show the DCFW the telephone number it dials without having to print all the TN programming. I have to duplicate a speed dial list in one PBX and create the same list in another PBX.

Any ideas????

 

[GHTROUT]

Just print all TNs in the phantom loop and open the captured file in one of the "MV" spreadheets in the files section of my site


~~~
[small]GHTROUT.com | Get the Input/Output Manuals | Tek-Tips FAQs | Recent Replies[/small]

 

[PeoplesBKTech]

I was hoping to find something with one line like

Type DN TN DCFW
500 XXXX 00 0 00 00 212 555 1212

I have over 400 to do!!!!

P.S. You have a great site will use in the future...

 

[GHTROUT]

Wait a minute here. You could have 4, 40 400 or 4000 - you don't have to do these one at a time. Let's say your Phantom TNs start with 156. Just go to LD20 and

REQ PRT
TYPE TNB
TN 156

and let it rip. Then open it up in one of those Excel files. It will come out exactly as your example


~~~
[small]GHTROUT.com | Get the Input/Output Manuals | Tek-Tips FAQs | Recent Replies[/small]

 

[PeoplesBKTech]

Your right I have to take copy and paste the information I need once I get it into a spreadsheet. Wish there was a way to import the data from my NY PBX to my NJ PBX.
Once the data is on my spreadsheet I have to enter the info into the NJ PBX manually creating 400 new phantoms...

 

[GHTROUT]

I see. In that case - either search for a script, or use my method:

http://www.ghtrout.com/ghtrout/files/ez-procom_scripts.zip

You can find scripts here if you uses the "grey" search button above and enter the phrase "proc main"


~~~
[small]GHTROUT.com | Get the Input/Output Manuals | Tek-Tips FAQs | Recent Replies[/small]

 

[PeoplesBKTech]

I will try thanks...

 

[Johnthephoneguy]

Using the MV file you can cut and paste to your hearts content, and a simple script will build as many phones as you want, sounds like you didnt look at those very much lol

JohnThePhoneGuy

"If I can't fix it, it's not broke!