Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Telephone Reports

Status
Not open for further replies.

PeoplesBKTech

Technical User
Dec 27, 2006
24
US
I need to generate a report of Phantoms in the PBX, however I need it to show the DCFW the telephone number it dials without having to print all the TN programming. I have to duplicate a speed dial list in one PBX and create the same list in another PBX.

Any ideas????
 
I was hoping to find something with one line like

Type DN TN DCFW
500 XXXX 00 0 00 00 212 555 1212

I have over 400 to do!!!!

P.S. You have a great site will use in the future...
 
Wait a minute here. You could have 4, 40 400 or 4000 - you don't have to do these one at a time. Let's say your Phantom TNs start with 156. Just go to LD20 and

REQ PRT
TYPE TNB
TN 156

and let it rip. Then open it up in one of those Excel files. It will come out exactly as your example :)


~~~
[small]GHTROUT.com | Get the Input/Output Manuals | Tek-Tips FAQs | Recent Replies[/small]
 
Your right I have to take copy and paste the information I need once I get it into a spreadsheet. Wish there was a way to import the data from my NY PBX to my NJ PBX.
Once the data is on my spreadsheet I have to enter the info into the NJ PBX manually creating 400 new phantoms...
 
Using the MV file you can cut and paste to your hearts content, and a simple script will build as many phones as you want, sounds like you didnt look at those very much lol

JohnThePhoneGuy

"If I can't fix it, it's not broke!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top