Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Telephone between 2 sites using SIP Trunk

Status
Not open for further replies.

kecubung dalam bacan

Systems Engineer
May 27, 2020
10
ID
Telephone between 2 sites using SIP Trunk


Hi, colleagues - all in this forum.
Can you help me with the problem I'm having?
Problems:
1. SIP Trunk connection is appropriate
2. But I can't chat, aka no sound appears between IP phones on the 2 sites. On the ip phone, a Conn notification has appeared, but yes, there is no sound either.

Here I attach the SSA capture and Log Monitor:


333759mS SIP Rx: UDP 10.140.0.253:5060 -> 10.210.200.1:5060
SIP/2.0 200 OK
Via: SIP/2.0/UDP 10.210.200.1:5060;rport;branch=z9hG4bKf318122015ded47e7e637613148a7f69
From: <sip:10.210.200.1>;tag=06415fb84424eb3f
Call-ID: 3f65727bf579e9cb12cdda05fb12eb28
CSeq: 487665660 OPTIONS
Allow: INVITE,ACK,CANCEL,OPTIONS,BYE,INFO,REFER,NOTIFY,UPDATE
Supported: timer
Server: IP Office 11.1.2.1.0 build 3
Content-Type: application/sdp
To: <sip:10.140.0.253>;tag=9d690ea25efe0683
Content-Length: 217

v=0
o=UserA 314516031 2002417562 IN IP4 10.140.0.253
s=Session SDP
c=IN IP4 10.140.0.253
t=0 0
m=audio 8000 RTP/AVP 8 0 18
a=rtpmap:8 PCMA/8000
a=rtpmap:0 PCMU/8000
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
 
No Speech means a data routing issue.

I would guess that the vlan with the IP handsets does not have a valid route out to the internet for the direct speech packets
solutions :-
0) IF both sites are IP Office don't use SIP use SCN over a proper private ling (VPN or MPLS) this improved operation will soon pay for itself!
1) fix the data routing
2) disable direct media path on the sip trunks (this is not ideal but probably ok in this case)



Do things on the cheap & it will cost you dear

ACSS
 
Hi IPGuru,

Permission to answer the questions you submitted.
0) Using MPLS
1) Fix the data routing, may I know what it includes?
2) For direct media path the position is disabled.

Thanks.
Regards.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top