TEK 850. Paper sticking to the drum

[Guest_imported]

When printing a diagnostic test page the red Tektronics banner sticks to the drum and the paper gets jammed on exit.

 

[cdory]

look at the maintenance tray if the pins that run on the drum miantenance cam are worn you will need to replace the whole maintenance tray

 

[MDA2]

If the paper is sticking, you need to replace the maitence kit. The black roller applies an oily layer on the drum acting like PAM for cooking.

If the pins where the issue, the printer would give a fault code 07.xxx.xx. Basically stating that the blade didn't rise to position.