TDM-BUS 1

[ahays]

We removed a MCC and replaced it with two (2) G650's on our CM 5.2.1 system. Basically, we created PN 4 and added the G650 as Cabinet 4 then one-by-one moved all of the cards and their corresponding translations. So, when it came time to remove the MCC everything went smoothly ... or so we thought. Now we have a TDM-BUS in port network 01A even though PN 1 no longer exists.

What did I overlook?

.al.

regs,

.al.

Avaya Certified Expert

http://www.jeral.com/avaya-learning.html

 

[AvayaTier3]

Al,

Post active alarms and hardware errors from cabinet 1 or PN 1

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]

 

[ahays]

Sorry for the delay. Things have been nuts and I didn't receive a notice of your reply. :/ Here are the current alarms and errors:

ALARM REPORT

Port Mtce On Alt Alarm Svc Ack? Date Date
Name Brd? Name Type State 1 2 Alarmed Resolved

PN 01A TDM-BUS y MINOR y 06/21/01:09 00/00/00:00
PN 01A TDM-BUS y MINOR y 06/21/01:09 00/00/00:00



HARDWARE ERROR REPORT - ACTIVE ALARMS

Port Mtce Alt Err Aux First/Last Err Err Rt/ Al Ac
Name Name Type Data Occurrence Cnt Rt Hr St

PN 01A TDM-BUS 1 0 06/21/01:08 2 0 0 a y
06/21/01:08
PN 01A TDM-BUS 257 0 06/21/01:09 1 0 0 a y
06/21/01:09
regs,

.al.

Avaya Certified Expert

http://www.jeral.com/avaya-learning.html

 

[AvayaTier3]

did you clear all PN1 programming and remove cabinet 1 programming

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]

 

[ahays]

As far as I can tell, Yes. There are no obvious PN1 or cabinet 1 translations in the PBX. I say "obvious" because there's "obviously" something there that we must've overlooked.

regs,

.al.

Avaya Certified Expert

http://www.jeral.com/avaya-learning.html

 

[ahays]

Also, this:

PN 01 EPN-SNTY 8801 0 06/28/00:28 188 18 11 n n
06/28/10:23
PN 01 EPN-SNTY 8806 0 06/28/00:29 179 18 9 n n
06/28/10:24
PN 01 EPN-SNTY 8807 0 06/28/00:30 175 17 8 n n
06/28/10:22
PN 01 EPN-SNTY 9904 0 06/28/08:12 4 1 1 n n
06/28/10:25
PN 01 EPN-SNTY 9903 0 06/28/08:18 9 6 0 n n


regs,

.al.

Avaya Certified Expert

http://www.jeral.com/avaya-learning.html

 

[AvayaTier3]

may be corruption of some sort. There are bugs in CM that allow cabinet removal when there are still things programmed.. like ip-interfaces, clans, medpros, valboards...
list ip-interface all and see if you get Error Encountered.
add cabinet 1 back into translations and see if you get more meaningful hardware errors to go with your alarms.

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]

 

[ahays]

Brett: Thanks for your support. My onsite guy did exactly what you suggested; added the cabinet back in and removed it. After performing this task twice all alarms seem to have disappeared except for a CSS warning (something that we're still working on) but at least all major/minor alarms associated with PN/Cabinet 1 are gone node.

regs,

.al.

Avaya Certified Expert

http://www.jeral.com/avaya-learning.html

 

[AvayaTier3]

add the cabinet back

list sync

change sync css

remove ds1 sync sources for cabinet 1

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]