Called in to make a minor modification, making one extension ring immediately on six CO lines, matching that of the port 1 (OPE) extension, I cannot enter program codes manually. After logging into the program mode, I can browse the first dozen codes (001 through 013) but, when I attempt to enter 603 (or any three-digit code) it responds with three-beep error at the third digit. Everything else on the system, programmatically and operationally, is fine, but I can't do anything beyond the first dozen programming options. We did not install this system. Is there some manner that programming at the OPE phoneset (7436) has been disabled?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
TD1232 (with 8EXT card) Programming Error?
- Thread starter slowit
- Start date
obtsystems
Programmer
Sounds like you are logging in as manager and not installer
And the main options are not available in program ** (manager)
And the main options are not available in program ** (manager)
- Thread starter
- #3
In Program Mode, I'm logging in with the default **1234. That's the manager login and *#1234 is the installer login? (We may have to guess at the installer password, if not the default.) Haven't encountered this on other D1232's we've installed, though I haven't had to revisit those installations in years. Time to call in one of the young guns, I guess. Thanks.
- Thread starter
- #4
obtsystems
Programmer
What version is the system. The password could be any number at all could not even guess
If you have a -4 or earlier, there is a password find trick that installers know. There is also a password "cracker" program floating around.
If we tell you, we'd have to kill you. It's not a huge deal to default the system, unless you have a lot of trunking or data in the box.
LkEErie
If we tell you, we'd have to kill you. It's not a huge deal to default the system, unless you have a lot of trunking or data in the box.
LkEErie
- Thread starter
- #7
As the system is functioning as required, with exception of one new extension that needs to immediately ring on all CO lines, we were extremely reluctant to attempt the Clear switch password discovery/reset process and risk losing all current programming if a mistake is made (during business hours).
Logged in as manager, or otherwise, what code confirms/displays the version?
Thanks
Logged in as manager, or otherwise, what code confirms/displays the version?
Thanks
- Status
Similar threads
- Locked
- Question