I have both a Token Ring Card and an Ethernet Card in our NT 4.0 Server (SP6 w/ RRAS installed) that has been running IPX protocol on both segments without any issues for several years. We are finally adding a broadband connection to the Ethernet segment and must set up the TCP/IP protocol on both the Token Ring and Ethernet segments. I've created a 192.168.2.1 thru 254 IP address range with a 255.255.255.0 subnet mask for all the Token Ring and Ethernet workstations. I've set things up this way but can't ping to the Ethernet segment from the Token Ring nor ping to the Token Ring segment from the Ethernet! How do I get one side to route to the other and vice versa? HELP!!