TCM Card Problem 1

[Martin30]

My friend bought TCM card to add 8 station on CICS ( used on Ebay of course ) , when i try to last pair on the amphenol, the phone still flashing.

Do i need to reset the unit after add the TCM Card ?

Do you think the Card is defective ?

Your help is very appreciated

 

[curlycord]

when i try to last pair on the amphenol, the phone still flashing."

If you are trying to say the last port will not boot up then it wont, you can only have 24 sets on the first 24 ports1, the 25th pair (last pair on amp) is for AUX ringer.


________________________________________
We take the time to try to answer your questions for free, please return the favor and take the time to answer back and include any resolution you found elsewhere, thanks.

=----(((((((((()----=

http://www.curlycord.com

Toronto Canada

http://www.telcopc.ca

 

[exsmogger]

Some of these so-called TCM boards only add clocking, but no stations. Post the full NT number from the card you got. It will start with NTBB04.

Brian Cox
Georgia Telephone

http://Georgia-Telephone.com

http://www.linkedin.com/in/briancox1952

 

[Martin30]

My mistake not the last pair , the Violet/brown pair.

 

[Martin30]

ntbb04gc-93

 

[exsmogger]

OK, that's a 8-port TCM card. Check the version of your CICS software. It might be restricted.

Brian Cox
Georgia Telephone

http://Georgia-Telephone.com

http://www.linkedin.com/in/briancox1952

 

[curlycord]

Ok if just one pair is not working then I am guessing a bad amp cable or not terminated fully/correctly.


________________________________________
We take the time to try to answer your questions for free, please return the favor and take the time to answer back and include any resolution you found elsewhere, thanks.

=----(((((((((()----=

http://www.curlycord.com

Toronto Canada

http://www.telcopc.ca