Hello All,
I have some problems with tapes (or the drives) since a few days. I reveive the following event messages (application log)
Event Type: Warning
Event Source: Networker
Event Category: Media
Event ID: 1
Date: 20.07.2007
Time: 12:54:21
User: N/A
Computer: Backupserver
Description:
NetWorker media: (warning) \\.\Tape0 writing: The request could not be performed because of an I/O device error., at file 9 record 17840
and
Event Type: Information
Event Source: Networker
Event Category: Media
Event ID: 1
Date: 20.07.2007
Time: 12:54:21
User: N/A
Computer: Backupserver
Description:
NetWorker media: (notice) verification of volume "ABC142L3", volid 2912980872 failed, volume is being marked as full.
Event Type: Warning
Event Source: Networker
Event Category: Media
Event ID: 1
Date: 20.07.2007
Time: 12:54:21
User: N/A
Computer: Backupserver
Description:
NetWorker media: (warning) verification of volume "ABC142L3", volid 2912980872 failed, read open error: drive status is Drive reports no error - but state is unknown
It was a new tape, and only 15GB had been written. Ideas?
Regards,
Oliver
I have some problems with tapes (or the drives) since a few days. I reveive the following event messages (application log)
Event Type: Warning
Event Source: Networker
Event Category: Media
Event ID: 1
Date: 20.07.2007
Time: 12:54:21
User: N/A
Computer: Backupserver
Description:
NetWorker media: (warning) \\.\Tape0 writing: The request could not be performed because of an I/O device error., at file 9 record 17840
and
Event Type: Information
Event Source: Networker
Event Category: Media
Event ID: 1
Date: 20.07.2007
Time: 12:54:21
User: N/A
Computer: Backupserver
Description:
NetWorker media: (notice) verification of volume "ABC142L3", volid 2912980872 failed, volume is being marked as full.
Event Type: Warning
Event Source: Networker
Event Category: Media
Event ID: 1
Date: 20.07.2007
Time: 12:54:21
User: N/A
Computer: Backupserver
Description:
NetWorker media: (warning) verification of volume "ABC142L3", volid 2912980872 failed, read open error: drive status is Drive reports no error - but state is unknown
It was a new tape, and only 15GB had been written. Ideas?
Regards,
Oliver