I have two Nortel 1000e telephone swithes connected via SIP. Switch 1 has a long distance trunk. I have the SIGO on the route set to ESN5. All of my sets on both switches have the NCOS set to 4. I have RLI 212 setup with a MFRL of 5 so that the users will be prompted for an Authcode. All of the sets on switch 1 work fine by prompting the user for an auth code. The users on switch 2 come across the sip trunk and go right out the long distance trunk without being prompted for an Auth code. Why are the sets on switch 2 not prompting for an auth code?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Tandem users not being prompted for Authcode on 1000e
- Thread starter stevendl
- Start date
bigindian65
Technical User
could try setting both sigo to STD, and the ncos of the trunk to 4 and test.
Mato' Was'aka
Mato' Was'aka
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
- Locked
- Question