Tandem trunking on Magix 1

[b9dvator]

hello All,

At what release did the Magix system support tandem trunking or trunk to trunk transfer capabilities? I'm trying to support a trial for mobility which requires a PRI connection from the Magix and tandem trunking capability.

thanks

b9dvator

 

[merlinman]

Well, they pretty much all did Trunk to Trunk Transfer, the best PRI setup is with the R7.

Some earlier ones were ok too, BUT with the R7's being so cheap, that's what I'd use.

Be cautious of 016 Mods with 517M T1 modules.

 

[b9dvator]

hello Merlinman,

i dont know enough about the magix system, can you give me a little more insight about the above mentioned configuration. . . .

thanks

b9dvator

 

[merlinman]

OH, I mis-read the question, YOU asked about MAGIX.

I was talking about RELEASE 7 Legend.

ALL MAGIX RELEASES can do trunk to trunk & PRI with ease.

Now, the caution is that you must not mix any MLX-016 or T&R-016 with a 617N15 T1 Card when doing PRI.

 

[b9dvator]

hello Merlinman,

many thanks for the information and the gotcha's, this is exactly what i was hoping for, , ,


thanks again

b9dvator