Tandem M1 and BCM using PRI Euro

[rodolfopereira]

We have a BCM, connected with a M1 Using VoIP. The objetive is to use the M1 like a Tandem. Actually the M1 is connected with the PSTN using an PRI Euro ISDN, but when the BCM send the call to the M1, the format of the CLID appear UNKW and the call cannot complete. Anyonne know how to solve it.

 

[johnpoole]

the clid is not a normal of routing without smposium, from the bcm insert the ac1 (9?) on calls attempting to tanden to your locals, they 9 will send then call to bars/nars. the usual block occurs when the ncos or targ of a remote or inbound route has a block disallowing the call. think of a tie trunk as a station call, if the ncos is lower then the frl assigned to the rlb.. targ/tgar by default is a block, both the tie to the bcm and the cot's will have a targ of one unless you have answered that prompt with x1...

john poole
bellsouth business
columbia,sc

 

[matterb]

With BCM 3.5 the Type Of Number should be specified for the route. We found that Private and Public were respectively recognised as CDP and Internaltiona by M1 running Succession. Other type came across as UKWN.