Hello.
I have two BCM's 4.0 at different location connected over voip tunks.H323 and SIP key kode is enabled.Tandem calls works fine bcm<h323>bcm<isdn>pstn and bcm<sip>bcm<isdn>pstn ,but... I also use voip gateway(patton smartnode1400 with h323/sip software) and installed demo MCS5100(sip).Everything works fine,i can call to all directions,but sip tandeming calls over bcm fail/disconnect after ~10-30 second becauce bcm do not sent to calling side(patton or mcs) "connect ack" or something similar... Any one has similar problem and how to solve this...
Darius
I have two BCM's 4.0 at different location connected over voip tunks.H323 and SIP key kode is enabled.Tandem calls works fine bcm<h323>bcm<isdn>pstn and bcm<sip>bcm<isdn>pstn ,but... I also use voip gateway(patton smartnode1400 with h323/sip software) and installed demo MCS5100(sip).Everything works fine,i can call to all directions,but sip tandeming calls over bcm fail/disconnect after ~10-30 second becauce bcm do not sent to calling side(patton or mcs) "connect ack" or something similar... Any one has similar problem and how to solve this...
Darius