Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Talkback paging on IPO?

Status
Not open for further replies.
TheZCom

TheZCom

Programmer
Nov 2, 2005
122
US
Has anybody successfully implemented "talkback" paging on IPO? Basically, you make a page to some overhead units capable of carrying voice back to the paging user. I believe we are looking into using a TBA-15 (Bogen). Thanks in advance for any input. Z
 
Sort by date Sort by votes
Talkback paging using trunk-level interface will work fine.
Mike
 
Upvote 0 Downvote
i have done it. I ma not sure it is the same equipment you are using but it works well. We did have to use a trunk.
 
Upvote 0 Downvote
yes, you will need to use trunk port for paging interface.

 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Jonjr88
  • Locked
  • Question
Multicast Paging on J100 Series 46xxspecials
Replies
2
Views
329
Jonjr88
Jonjr88
thephonelady
  • Locked
  • Question
Paging ?
Replies
7
Views
590
thephonelady
thephonelady
DigitalG
  • Question
Automatic Paging via VMPRO
Replies
4
Views
315
budbyrd
budbyrd
NYSTECH
  • Locked
  • Question
IPO 12.0 Upgrade fails on Dell 630 servers
Replies
8
Views
874
NYSTECH
NYSTECH
lleeNC
  • Locked
  • Question
IPO R12 on HP Proliant Avaya Server Issues
Replies
5
Views
737
IamaSherpa
IamaSherpa

Part and Inventory Search

Sponsor

Back
Top